JUMA Amateur Radio Forum

Hi Billy,

Pse check that you have set JUMA PA1000 for BCD band data. Push the PAGE button until you are on Band Data page and select BCD with the up/dwn buttons.

You may also need to set something in FTDX10, like in FT-891 menu item 16-15 to "LAMP" (Linear Amplifier).

Matti OH7SV

Hi Eugene,

It is Hammond 1402D enclosure. You can purchase it eg from Mouser
www.mouser.ca/ProductDetail/Hammond-Man ... 2Fdg%3D%3D

You see other TRX2A part here www.jumaradio.com/juma-trx2/rev-b/index.html

73 Matti OH7SV

Hello Robert,

The Chinese are bandits, they don't respect copyright.

Matti OH7SV

Hello HH,

Here are the parts for the plug. Originally made by JST.

DC plug JST LP-02-1
Female crimp JST 0.5–2.0

www.jumaradio.com/juma-trx2/rev-b/index.html

73 Matti OH7SV

Very good Kurt,
Enjoy building and using the PCBs!
73 Matti OH7SV

Kurt,

Did the updated TRX2 all band PA Gerber files work?

73 Matti OH7SV

Hi Kurt,

I checked the TRX2 all band PA Gerber files. You are right, there was a problem. I have now generated and uploaded new Gerber files.
See trx2-all-band-pa-B.zip here www.jumaradio.com/juma/juma-geber-files.html

73 Matti OH7SV

Hi Kurt,

I checked the TRX2 all band PA Gerber files. There was a problem. I have now generated and uploaded new Gerber files.
See trx2-all-band-pa-B.zip here www.jumaradio.com/juma/juma-geber-files.html

73 Matti OH7SV

Ian, I have tested only 100W but I don't see any problem with 200W thru PA1000 when it is STBY or power OFF. The TRX connector is connected to ANT connector via T/R relay and a 100nF capacitor. See the attached simplified schematics. Note. Be careful when switching PA1000 to OPER state - remember to ...

Thomas,

Have look roWaves site https://rowaves.com/juma-tx-500-60w-500 ... ansmitter/

73 Matti OH7SV