PA100-D Automatic Power On

[KD4PWU]

I have been using my PA100-D with an ANAN-10 to support my digital mode operations for a while now and have been very happy with the results.

The PA100-D is located in my shack and I operate from another room in my home. Everythign works well unless the power drops. Then I have to go to where the shack and push the power button to power it back up.


Is there a setting that I have missed or a modification that I can make so that the PA100-D will power up when my VDC power supply is turned on?

Bob, KO2F
(formerly KD4PWU)

[WA4MZS]

Hi Bob,

Maybe put the jumper on J4 on the control board? But with the jumper in place, the PA100 can only be turned on/off via the power supply. Might be risky??

73
Ed.
WA4MZS

[KD4PWU]

Thanks Ed!

J4 is just what I was looking for.

Bob, KO2F